Shell is constructed of Ultra High Molecular Weight Fiber. Raising the level of protection while reducing the weight for the utmost in comfort.

Shell trim contour is brimless with extra wide eye port opening for maximum peripheral vision and to comfortably accommodate all known gas masks and protective eye ware. Neck trim line is done .500 higher than standard trim to allow uninhibited movement when wearing a ballistic vest with collar.

Retention System: The retention system is built of tubular nylon webbing reinforced with double bar tacked stitching in critical areas, and will come with both a fully adjustable, smooth slide lock system, and padded nape strap to insure a stable, secure fit. A user friendly quick release mounted on the left side of the wearers head will facilitate easy on easy off use with no interference when sighting the individuals weapon for target acquisition.

The Comfort Fit System is a comfortable, four point, fully adjustable sizing system accommodates XS-XL, fit pad is made of a a soft polypropylene outer material to facilitate wicking and is combined with a maximum perspiration absorbing liner.

Personal Body Armor - Ballistic Plates These ballistic chest and back plates are manufactured utilizing advanced Thermoplastic Composite (TPC) Ballistic Materials in conjunction with a pre-shaped Alumina ceramic panel.

Price $245.00

Peltor ComTac ACH Headset Kits The COMTAC A-C-H is the 3rd generation of COMTAC Tactical Communication Headsets from Peltor® - Headset kits include PTT adaptor and camo bag

Price from: $740.00

Peltor Swat Tac II Communications Headset Peltor Swat Tac II Communication Military specification tactical headset. Fits under PASGT, MICH and ACH helmets.

Price: $490.00

AVENGER - Behind the Neck Tactical Comms Headset Neckband communications headset - Sordin electronics provides situational awareness for a total tactical solution

Price $535.00

SWATCOM - Rugged Military grade headset Adjustable behind the head Military grade waterproof headset with flexible boom microphone

Price $255.00

Peltor Shooting Eye Protection The QX TAC PAC protective eyewear for Military and law enforcement.

Price: $42.50

SHELL
The three-quarter coverage shell is constructed of high density Tenntex Thermo Composite utilizing high pressure injection compression molding for increased strength while maintaining a lightweight helmet, shell edge has a finished trim made of steel core extruded neoprene rubber. Visor is an integral molded part of the shell. Back edge of shell is tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shield. Most current gas masks can be used with this helmet. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not exceed 3 lbs. including shield.

LINER
The impact liner is constructed of expanded polystyrene (EPS). The liner will have a minimum thickness of 3/4" in test plane area to provide maximum impact energy attenuation. Two EPS liner sizes shall be available to offer optimum comfort and appearance. The EPS liner is completely covered by a vented brush nylon material that is bonded to a multi-density foam for comfort and durability. This material provides maximum wicking of perspiration away from the user´s head to allow for the most cooling to the wearer.

SIZES
Size Range 6 3/4" to 8 1/8". Order by S/M 6 3/4"-7 1/4", L/XL 7 3/8"-7 7/8", and XXL 8"-8 1/8". Two self adhesive sizing strips will be included with each helmet for sizing adjustment within a shell range.

RETENTION SYSTEM
The retention system includes a two point attachment harness. The chin strap is equipped with a quick release buckle (all metal working parts) for secure fastening that meets or exceeds industry standards. The quick release buckle allows fast entrance and exit to helmet even when user is wearing gloves.

RIOT SHIELD
The face shield is constructed of high impact transparent material with a clear, optical grade finish. Measurements of face shield are 7" x 18" with a .125 thickness. The liquid seal is a molded TPE material, black and semi-rigid affixed to prevent a passage of liquids from the helmet dome or face shield onto the inner shield surface when the shield is in the down position. Tactical face shield is mounted directly using standard mounting blocks. The shield mounting system to be designed and affixed to be integral to the shield, remaining in place when shield is removed from the helmet. Shield blocks will mount to the helmet with rivets and shield to install mounting blocks with thumbscrew that will lock the shield in desired position. Both are designed for maximum shear strength. Shield mount is designed to accommodate most gas masks behind shield when in down position.

STANDARDS
Meets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

Personal Body Armor - Ballistic Plates These ballistic chest and back plates are manufactured utilizing advanced Thermoplastic Composite (TPC) Ballistic Materials in conjunction with a pre-shaped Alumina ceramic panel.

Price $245.00

Peltor ComTac ACH Headset Kits The COMTAC A-C-H is the 3rd generation of COMTAC Tactical Communication Headsets from Peltor® - Headset kits include PTT adaptor and camo bag

Price from: $740.00

Peltor Swat Tac II Communications Headset Peltor Swat Tac II Communication Military specification tactical headset. Fits under PASGT, MICH and ACH helmets.

Price: $490.00

AVENGER - Behind the Neck Tactical Comms Headset Neckband communications headset - Sordin electronics provides situational awareness for a total tactical solution

Price $535.00

SWATCOM - Rugged Military grade headset Adjustable behind the head Military grade waterproof headset with flexible boom microphone

Price $255.00

Peltor Shooting Eye Protection The QX TAC PAC protective eyewear for Military and law enforcement.

Price: $42.50