SHELL
The three-quarter coverage shell is constructed of high density Tenntex Thermo Composite utilizing high pressure injection compression molding for increased strength while maintaining a lightweight helmet, shell edge has a finished trim made of steel core extruded neoprene rubber. Visor is an integral molded part of the shell. Back edge of shell is tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shield. Most current gas masks can be used with this helmet. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not exceed 3 lbs. including shield.

LINER
The impact liner is constructed of expanded polystyrene (EPS). The liner will have a minimum thickness of 3/4" in test plane area to provide maximum impact energy attenuation. Two EPS liner sizes are available to offer optimum comfort and appearance. The EPS liner is completely covered by a vented brush nylon material that is bonded to a multi-density foam for comfort and durability. This material provides maximum wicking of perspiration away from the user´s head to allow for the most cooling to the wearer.

SIZES
Size Range 6 3/4" to 8 1/8". Order by S/M 6 3/4"-7 1/4", L/XL 7 3/8"-7 7/8", and XXL 8"-8 1/8". Two self adhesive sizing strips will be included with each helmet for sizing adjustment within a shell range.

RETENTION SYSTEM
The retention system includes a two point attachment harness. The chin strap is equipped with a quick release buckle (all metal working parts) for secure fastening that meets or exceeds industry standards. The quick release buckle allows fast entrance and exit to helmet even when user is wearing gloves.

RIOT SHIELD
The face shield is constructed of high impact transparent material with a clear, optical grade finish. Measurements of face shield are 7" x 18" with a .125 thickness. The liquid seal is a molded TPE material, black and semi-rigid affixed to prevent a passage of liquids from the helmet dome or face shield onto the inner shield surface when the shield is in the down position. Tactical face shield is mounted directly using standard mounting blocks. The shield mounting system to be designed and affixed to be integral to the shield, remaining in place when shield is removed from the helmet. Shield blocks will mount to the helmet with rivets and shield to install mounting blocks with thumbscrew that will lock the shield in desired position. Both are designed for maximum shear strength. Shield mount is designed to accommodate most gas masks behind shield when in down position.

STANDARDS
Meets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).